10 Best 3D Printed Raspberry Pi Cases

Raspberry Pis are getting extra well-liked, and it’s no marvel. You are able to do a lot with so little if you use a Raspberry Pi. These tiny computer systems that run on Linux are transportable and inexpensive, typically making them the proper resolution in your initiatives.

It’s a good suggestion to get a case in your Pi to protect it from its surroundings. You by no means know what can occur—you could possibly spill a drink in your Pi or unintentionally slide a paperclip into an open circuit inflicting harm to your candy little marvel pc. When you can definitely buy a case, anybody with a 3D printer can select from all kinds of case designs to print at dwelling.

We’ll have a look at a sampling of the good case designs for Raspberry Pi 4, Raspberry Pi 3, Raspberry Pico, in addition to some uncommon customized case designs for particular circumstances and targets. All these 3D-printed Raspberry Pi case designs are freely obtainable on Thingiverse.

3D Printed Circumstances for the Raspberry Pi 4

The instances listed below work nicely for the Raspberry Pi 4 and its variants.

1. Raspberry Pi 4 Case

John Sinclair has designed a case for the Pi 4 that accommodates a 40mm fan. Sinclair says that the fan is designed to suit the case’s lid without the necessity for glue or screws. Notably, it’s printed with no high or backside layers, which makes the infill seen and offers this case its distinctive hexagonal look.

2. Raspberry Pi 4 Case, Energetic Cooled with Wall Mount

British engineer Tim Skillman got here up with this well-ventilated case design that slides collectively without the necessity for glue or screws. The case itself is available in two elements, and the design additionally features a single-piece wall mount.

The lid is customizable; the ports are labeled, and it’s straightforward to take away the Micro SD card, one thing that may be tough to do with different case designs.

3. Raspberry Pi 4B Wind Tunnel Case

For those who’ve added a hat to your Pi that covers the whole board, you’re going to wish to get some airflow going so your Pi doesn’t overheat. This case is designed to chill the air between the board and hats that cowl the whole board. Michael Kelly’s design directs air via a duct from a fan mounted beneath the board.

3D Printed Circumstances for the Raspberry Pi 3

There’s no scarcity of designs for 3D printed instances for the Raspberry Pi 3. Listed below are two which might be designed to impress.

4. Raspberry Pi 3 (B/B+), Pi 2 B, and Pi 1 B+ Case with VESA Mounts and Extra

For those who seek 3D printed Raspberry Pi instances on Thingiverse, this case is prone to seem on the high of the search outcomes. Provided by person 0110-M-P on Thingiverse, this case design has been downloaded over 169,000 instances and has over 288 remixes, which signifies that different designers have riffed on this unique design.

It’s appropriate with the Raspberry Pi 3 Mannequin B+ and Mannequin B in addition to the Raspberry Pi 2 Fashions B and B+. It’s obtained an entry slot for a Pi digicam, built-in VESA mounting tabs, and a screw-together design that mounts the case to the Raspberry Pi. It’s licensed via an Inventive Commons – Attribution – Share-Alike license.

5. Malolo’s Screw-less/Snap Match Customizable Raspberry Pi 3 mannequin B+ Case & Stands

Maker Malolo has given us an easy-to-print case that doesn’t require any screws or glue. The snap-fit design is slim and compact, and it comes with three totally different sorts of stands: vertical, horizontal, and flat.

Even in case, you don’t have a multi-material printer, you possibly can print a case with a number of colors by following his multi-color printing directions. Remember to click on the images to get a thought of some totally different coloration mixtures you could possibly use.

3D Printed Circumstances for the Raspberry Pi Pico

The Raspberry Pi Pico is a tiny, quick microcontroller board that prices simply 4 {dollars}. Superb. It’s comparatively new, so there aren’t many 3D case designs for it but, however one of many case designs under ought to fit your wants.

6. Raspberry Pi Pico Case

This customizable case design from David Becerro consists of a number of setups. It’s printed in two elements, and each has variations with holes which you’ll want in case you use a pin strip. Notice that the holes for the required screws usually are not threaded, so get out your screwdriver.

7. Raspberry Pi Pico Lego Case

Adafruit Industries brings us a cute little Lego case in your Pi Pico. This design is appropriate with LEGO. It has built-in standoffs, so your Pico will snap-fit proper onto the bottom plate. The enclosure has a house for 2 switches for buttons.

Specialty 3D Printed Raspberry Pi Circumstances

A part of the lure of 3D printing is that it’s quick and low cost to check out loopy concepts. Try these uncommon case designs for a number of totally different use instances.

8. Raspberry Pi Open “Case”

Are you the type of one who likes to let all of it hang around? In that case, that is the case for you. The open design of this case by Tim Murphy permits you to place an exterior fan so it’s blowing immediately on the heatsink. It’s a mashup of a number of different designs, taking the most effective from every and placing all of them collectively on this revolutionary case design.

Murphy, who goes by knowledge cravings, calls himself a novice designer, however, you wouldn’t understand it.

Cat homeowners beware, nevertheless! The designer of this case warns, “One serious downside of an open case design is that a curious cat might decide that it’s fun to stop the fan with a claw and then bite it.”

9. Folding Raspberry Pi Case

Designer Walter Hsiao brings us a folding Raspberry Pi case that prints flat after which wraps around your Pi. It’s obtainable for The Pi 2 fashions B and B+ and the Pi 3 fashions B and B+. You’ll want two flathead screws to carry all of it collectively.

10. RackPi Rack Protect

From Daniel Reinke, referred to as SliderBOR, we get the RackPi Raspberry Pi Rack Protect with OLED and Energy Swap. This design options an OLED information display with a button for rebooting and shutting down the Pi in addition to an LED standing mild.

On the Raspberry Pi 4B and 3B+, the change will flip the Pi fully off, however, you’ll want some further provides to print this design. SliderBOR’s directions take you thru all of the supplies and steps to print and assemble the entire challenge.

 

Leave a Reply

Your email address will not be published.